Текст од Sergey94 - English
Antenna technology
- One of the main problems to solve when designing printed antenna devices equipped with a power divider is that when radiators placed in the same plane with a divider a good isolation between ports is hardly achievable due to mutual coupling of radiators and a divider.
- This drawback can be tackled either by increasing space between radiators and a divider or by placing radiators and a divider on the different sides of the substrate.
- In both cases, it is not guaranteed that when changing the topology of antenna it is possible to save radiation characteristics.
- On the other hand, when increasing elements spacing the input impedance of the antenna can change and, hence, would need to be tuned again.
- There have been a few reports that have considered the influence of power divider on the antenna characteristics, when radiating elements of the antenna were placed orthogonally with respect to the divider.
- However, the design of a ring power divider itself requires taking into account undesirable parasitic radiation effects when divider radiates electromagnetic waves.
- Another issue occurs because of poor matching between power divider and radiator.
- In this case, power from a divider rejects from the radiators and propagates toward the source.
- There are many designs of multiple port devices in which authors focus on solving such problems.
- Sergey94December 2018Сада гласајте !
МОЛИМО, ПОМОЗИТЕ ИСПРАВИТИ СВАКУ РЕЧЕНИЦУ! - English