批改

现在就来帮忙修正吧！裸眼

從Sergey94來的文本 - English

  • Antenna technology

    • One of the main problems to solve when designing printed antenna devices equipped with a power divider is that when radiators placed in the same plane with a divider a good isolation between ports is hardly achievable due to mutual coupling of radiators and a divider.
    • This drawback can be tackled either by increasing space between radiators and a divider or by placing radiators and a divider on the different sides of the substrate.
  • In both cases, it is not guaranteed that when changing the topology of antenna it is possible to save radiation characteristics.
    • On the other hand, when increasing elements spacing the input impedance of the antenna can change and, hence, would need to be tuned again.
  • There have been a few reports that have considered the influence of power divider on the antenna characteristics, when radiating elements of the antenna were placed orthogonally with respect to the divider.
  • However, the design of a ring power divider itself requires taking into account undesirable parasitic radiation effects when divider radiates electromagnetic waves.
  • Another issue occurs because of poor matching between power divider and radiator.
  • In this case, power from a divider rejects from the radiators and propagates toward the source.
  • There are many designs of multiple port devices in which authors focus on solving such problems.

请帮忙修正每一个句子 - English

  • 标题
  • 句子 1
    • One of the main problems to solve when designing printed antenna devices equipped with a power divider is that when radiators placed in the same plane with a divider a good isolation between ports is hardly achievable due to mutual coupling of radiators and a divider.
      赶紧投票吧！
    • One of the main problems to solve, when designing printed antenna devices that are equipped with a power divider, is that when radiators placed in the same plane with a divider a good isolation between ports is hardly achievable due to mutual coupling of radiators and a divider.
      nonomnismoriarnonomnismoriar profile picture 评论
      赶紧投票吧！
    • 增加一條新的校正! - 句子 1增加一條新的校正! - 句子 1
  • 句子 2
    • This drawback can be tackled either by increasing space between radiators and a divider or by placing radiators and a divider on the different sides of the substrate.
      赶紧投票吧！
    • This drawback can be tackled by either by increasing space between radiators and a divider or by placing radiators and a divider on the different sides of the substrate.
      nonomnismoriarnonomnismoriar profile picture 评论
      赶紧投票吧！
    • 增加一條新的校正! - 句子 2增加一條新的校正! - 句子 2
  • 句子 3
    • In both cases, it is not guaranteed that when changing the topology of antenna it is possible to save radiation characteristics.
      赶紧投票吧！
    • 增加一條新的校正! - 句子 3增加一條新的校正! - 句子 3
  • 句子 4
  • 句子 5
    • There have been a few reports that have considered the influence of power divider on the antenna characteristics, when radiating elements of the antenna were placed orthogonally with respect to the divider.
      赶紧投票吧！
    • 增加一條新的校正! - 句子 5增加一條新的校正! - 句子 5
  • 句子 6
    • However, the design of a ring power divider itself requires taking into account undesirable parasitic radiation effects when divider radiates electromagnetic waves.
      赶紧投票吧！
    • 增加一條新的校正! - 句子 6增加一條新的校正! - 句子 6
  • 句子 7
  • 句子 8
  • 句子 9