Perbaikan

BANTU PERBAIKI SEKARANG JUGATidak dikoreksi

Pesan dari Sergey94 - English

  • Antenna technology

    • One of the main problems to solve when designing printed antenna devices equipped with a power divider is that when radiators placed in the same plane with a divider a good isolation between ports is hardly achievable due to mutual coupling of radiators and a divider.
    • This drawback can be tackled either by increasing space between radiators and a divider or by placing radiators and a divider on the different sides of the substrate.
  • In both cases, it is not guaranteed that when changing the topology of antenna it is possible to save radiation characteristics.
    • On the other hand, when increasing elements spacing the input impedance of the antenna can change and, hence, would need to be tuned again.
  • There have been a few reports that have considered the influence of power divider on the antenna characteristics, when radiating elements of the antenna were placed orthogonally with respect to the divider.
  • However, the design of a ring power divider itself requires taking into account undesirable parasitic radiation effects when divider radiates electromagnetic waves.
  • Another issue occurs because of poor matching between power divider and radiator.
  • In this case, power from a divider rejects from the radiators and propagates toward the source.
  • There are many designs of multiple port devices in which authors focus on solving such problems.

TOLONG, BANTUANNYA UNTUK MEMBENARKAN SETIAP KALIMAT! - English

  • Judul
  • Kalimat 1
    • One of the main problems to solve when designing printed antenna devices equipped with a power divider is that when radiators placed in the same plane with a divider a good isolation between ports is hardly achievable due to mutual coupling of radiators and a divider.
      Pilih sekarang juga!
    • One of the main problems to solve, when designing printed antenna devices that are equipped with a power divider, is that when radiators placed in the same plane with a divider a good isolation between ports is hardly achievable due to mutual coupling of radiators and a divider.
      nonomnismoriarnonomnismoriar profile picture Komentar
      Pilih sekarang juga!
    • TAMBAHKAN KOREKSI YANG BARU! - Kalimat 1TAMBAHKAN KOREKSI YANG BARU! - Kalimat 1
  • Kalimat 2
    • This drawback can be tackled either by increasing space between radiators and a divider or by placing radiators and a divider on the different sides of the substrate.
      Pilih sekarang juga!
    • This drawback can be tackled by either by increasing space between radiators and a divider or by placing radiators and a divider on the different sides of the substrate.
      nonomnismoriarnonomnismoriar profile picture Komentar
      Pilih sekarang juga!
    • TAMBAHKAN KOREKSI YANG BARU! - Kalimat 2TAMBAHKAN KOREKSI YANG BARU! - Kalimat 2
  • Kalimat 3
  • Kalimat 4
  • Kalimat 5
    • There have been a few reports that have considered the influence of power divider on the antenna characteristics, when radiating elements of the antenna were placed orthogonally with respect to the divider.
      Pilih sekarang juga!
    • TAMBAHKAN KOREKSI YANG BARU! - Kalimat 5TAMBAHKAN KOREKSI YANG BARU! - Kalimat 5
  • Kalimat 6
    • However, the design of a ring power divider itself requires taking into account undesirable parasitic radiation effects when divider radiates electromagnetic waves.
      Pilih sekarang juga!
    • TAMBAHKAN KOREKSI YANG BARU! - Kalimat 6TAMBAHKAN KOREKSI YANG BARU! - Kalimat 6
  • Kalimat 7
  • Kalimat 8
  • Kalimat 9