Korekty

POMÓŻ POPRAWIĆ TERAZ!Niepoprawione

Text from Sergey94 - English

  • Antenna technology

    • One of the main problems to solve when designing printed antenna devices equipped with a power divider is that when radiators placed in the same plane with a divider a good isolation between ports is hardly achievable due to mutual coupling of radiators and a divider.
    • This drawback can be tackled either by increasing space between radiators and a divider or by placing radiators and a divider on the different sides of the substrate.
  • In both cases, it is not guaranteed that when changing the topology of antenna it is possible to save radiation characteristics.
    • On the other hand, when increasing elements spacing the input impedance of the antenna can change and, hence, would need to be tuned again.
  • There have been a few reports that have considered the influence of power divider on the antenna characteristics, when radiating elements of the antenna were placed orthogonally with respect to the divider.
  • However, the design of a ring power divider itself requires taking into account undesirable parasitic radiation effects when divider radiates electromagnetic waves.
  • Another issue occurs because of poor matching between power divider and radiator.
  • In this case, power from a divider rejects from the radiators and propagates toward the source.
  • There are many designs of multiple port devices in which authors focus on solving such problems.

POMÓŻ POPRAWIĆ KAŻDE ZDANIE Z OSOBNA - English

  • Tytuł
  • Zdanie 1
    • One of the main problems to solve when designing printed antenna devices equipped with a power divider is that when radiators placed in the same plane with a divider a good isolation between ports is hardly achievable due to mutual coupling of radiators and a divider.
      Głosuj teraz!
    • One of the main problems to solve, when designing printed antenna devices that are equipped with a power divider, is that when radiators placed in the same plane with a divider a good isolation between ports is hardly achievable due to mutual coupling of radiators and a divider.
      nonomnismoriarnonomnismoriar profile picture Komentarze
      Głosuj teraz!
    • DODAJ NOWĄ KOREKTĘ! - Zdanie 1DODAJ NOWĄ KOREKTĘ! - Zdanie 1
  • Zdanie 2
    • This drawback can be tackled either by increasing space between radiators and a divider or by placing radiators and a divider on the different sides of the substrate.
      Głosuj teraz!
    • This drawback can be tackled by either by increasing space between radiators and a divider or by placing radiators and a divider on the different sides of the substrate.
      nonomnismoriarnonomnismoriar profile picture Komentarze
      Głosuj teraz!
    • DODAJ NOWĄ KOREKTĘ! - Zdanie 2DODAJ NOWĄ KOREKTĘ! - Zdanie 2
  • Zdanie 3
    • In both cases, it is not guaranteed that when changing the topology of antenna it is possible to save radiation characteristics.
      Głosuj teraz!
    • DODAJ NOWĄ KOREKTĘ! - Zdanie 3DODAJ NOWĄ KOREKTĘ! - Zdanie 3
  • Zdanie 4
  • Zdanie 5
    • There have been a few reports that have considered the influence of power divider on the antenna characteristics, when radiating elements of the antenna were placed orthogonally with respect to the divider.
      Głosuj teraz!
    • DODAJ NOWĄ KOREKTĘ! - Zdanie 5DODAJ NOWĄ KOREKTĘ! - Zdanie 5
  • Zdanie 6
    • However, the design of a ring power divider itself requires taking into account undesirable parasitic radiation effects when divider radiates electromagnetic waves.
      Głosuj teraz!
    • DODAJ NOWĄ KOREKTĘ! - Zdanie 6DODAJ NOWĄ KOREKTĘ! - Zdanie 6
  • Zdanie 7
  • Zdanie 8
  • Zdanie 9