Corrections

BANTU BUAT PEMBETULAN SEKARANG!Dibetulkan

Teks daripada ewelina_za3 - English

    • Arduino - an open source development platform

    • Arduino - an open source development platform and one of the most popular tools used for rapid prototyping by DIYers and engineers around the world.
  • This platform is extremely versatile, which is proven by the fact that it is a fundamental building block for projects such as building automation systems, game consoles, telephone and radio communication devices, measurement systems, and interactive toys.
    • The most popular of the Arduino series - UNO R3 baseboard with a microcontroller onboard - is a great tool for creating many electronic projects.
    • But if you add some expansion modules to it, its potential dramatically increases and creates even more possibilities.
  • This article reviews expansion modules in the form of shields with compatible pins.
    • I’d like to present twelve shields for Arduino with various functionalities from the Botland store; all twelve of them extend the basic capabilities of the iconic PCB with a microcontroller.
  • Communication module - a module that allows Arduino to be connected via MIDI - the iconic serial interface used in electronic musical instruments from the first half of the 1980s to the present day.
  • With this interface, you can control synthesizers, sequencers, drum machines, and other musical instruments.
    • Since MIDI is a protocol that shares many features with standard asynchronous serial interfaces, you can use the Arduino UART pins to send and receive MIDI messages, for example, such as pressing or releasing a key on the keyboard, or changing the position of the modulation wheel.
  • MIDI control signals are sent through optocouplers.
    • The MIDI KIT Shield module can be plugged directly into the Arduino baseboard - the MIDI-IN connector will be connected to the Rx pin, while the MIDI-OUT connector will stay connected to the Tx pin, and the potentiometers on the MIDI KIT Shield board - to the A1 and A2 pins in the section of analog pins.
  • In this way, they can be controlled by adjusting the instrument’s output volume, retuning, timbre, or other parameters assigned by the user.
    • In addition, the board has three momentary buttons connected to the Arduino digital pins 2-4, with which you can transpose the keyboard, change presets, and other user-assigned functions.
    • The board has a RESET button, two LEDs that signal i.e. the exchange of MIDI messages, and a RUN/PROG button that allows you to re-program Arduino without disconnecting the MIDI KIT Shield module.
  • The Spectrum Shield enriches the Arduino baseboard with the ability to split the stereo audio signal fed to the input of the system into seven frequency bands for each channel.
    • As a result, using an analog-to-digital converter in the Arduino (analog pins 0-5), you can control any external object (e.g. a motor, lighting, or a buzzer) by detecting the sound in a programmed frequency band of the input signal (e.g. using prescaler), and examine its frequency spectrum as well.
  • The sound is fed to the stereo 3.5 TRS input - with the same connector at the output of the system.
    • The signal transmission is uninterruptible.
  • The shield can also be used to build sound responsive illumination to create colorful animations for music, as well as sound activation of other devices.
    • Forbot Robot Shield Arduino The expansion shield from Forbot, compatible with Arduino, is a versatile electronic module with which you can add many interesting, useful functions to your robot.
  • On a small PCB, apart from the connectors with a pin layout compatible with Arduino UNO R3, there is a two-channel driver for DC motors, which allows you to control their speed and direction of rotation.
    • The maximum current efficiency per single channel is 1.2 A.
    • Designers took care to protect the electronic circuits contained on the board, using anti-interference filters.
  • The 8-channel pin expander for the input/output ports allows you to connect more external devices.
    • The buzzer with the infrared receiver can be programmed to trigger an acoustic signal when an obstacle is detected near the robot.
    • Besides, the board has a slide switch, an LED that indicates that the module is on, a polymer fuse, and protection against voltage with reverse polarity.
    • The board requires a voltage of 7-11 V, while the Arduino base module draws power from the Robot Shield board and thus does not need a separate power source.
    • SparkFun XBee Shield – a shield for Arduino Radio communication with the XBee system is a great way to increase the wireless communication capabilities of Arduino, and this can be achieved with a compatible SparkFun XBee Shield module attached to the baseboard.

MOHON BANTU UNTUK BETULKAN SETIAP AYAT! - English

  • Title
  • Ayat 1
    • Arduino - an open source development platform and one of the most popular tools used for rapid prototyping by DIYers and engineers around the world.
      Undi sekarang!
    • Arduino -is an open source development hardware platform and one of the most popular toolcircuit boards used for rapid prototyping by DIYers and engineers around the world.
      AussieInBgAussieInBg profile picture Ulasan 1
      Undi sekarang!
    • TAMBAH PEMBETULAN YANG BARU! - Ayat 1TAMBAH PEMBETULAN YANG BARU! - Ayat 1
  • Ayat 2
    • This platform is extremely versatile, which is proven by the fact that it is a fundamental building block for projects such as building automation systems, game consoles, telephone and radio communication devices, measurement systems, and interactive toys.
      Undi sekarang!
    • TAMBAH PEMBETULAN YANG BARU! - Ayat 2TAMBAH PEMBETULAN YANG BARU! - Ayat 2
  • Ayat 3
    • The most popular of the Arduino series - UNO R3 baseboard with a microcontroller onboard - is a great tool for creating many electronic projects.
      Undi sekarang!
    • The most popular of the Arduino series - the UNO R3 baseboard with a microcontroller onboard - is a great toolboard for creating many electronic projects.
      AussieInBgAussieInBg profile picture Ulasan 1
      Undi sekarang!
    • TAMBAH PEMBETULAN YANG BARU! - Ayat 3TAMBAH PEMBETULAN YANG BARU! - Ayat 3
  • Ayat 4
  • Ayat 5
  • Ayat 6
    • I’d like to present twelve shields for Arduino with various functionalities from the Botland store; all twelve of them extend the basic capabilities of the iconic PCB with a microcontroller.
      Undi sekarang!
    • I’d like to present twelve shields for Arduino with various functionalities from the Botland store; a. All twelve of them extend the basic capabilities of theis iconic PCB with a microcontroller.
      AussieInBgAussieInBg profile picture Ulasan
      Undi sekarang!
    • TAMBAH PEMBETULAN YANG BARU! - Ayat 6TAMBAH PEMBETULAN YANG BARU! - Ayat 6
  • Ayat 7
    • Communication module - a module that allows Arduino to be connected via MIDI - the iconic serial interface used in electronic musical instruments from the first half of the 1980s to the present day.
      Undi sekarang!
    • TAMBAH PEMBETULAN YANG BARU! - Ayat 7TAMBAH PEMBETULAN YANG BARU! - Ayat 7
  • Ayat 8
  • Ayat 9
    • Since MIDI is a protocol that shares many features with standard asynchronous serial interfaces, you can use the Arduino UART pins to send and receive MIDI messages, for example, such as pressing or releasing a key on the keyboard, or changing the position of the modulation wheel.
      Undi sekarang!
    • Since MIDI is a protocol that shares many features with standard asynchronous serial interfaces, you can use the Arduino UART pins to send and receive MIDI messages, for example, such asby pressing or releasing a key on the keyboard, or changing the position of the modulation wheel.
      AussieInBgAussieInBg profile picture Ulasan
      Undi sekarang!
    • TAMBAH PEMBETULAN YANG BARU! - Ayat 9TAMBAH PEMBETULAN YANG BARU! - Ayat 9
  • Ayat 10
  • Ayat 11
    • The MIDI KIT Shield module can be plugged directly into the Arduino baseboard - the MIDI-IN connector will be connected to the Rx pin, while the MIDI-OUT connector will stay connected to the Tx pin, and the potentiometers on the MIDI KIT Shield board - to the A1 and A2 pins in the section of analog pins.
      Undi sekarang!
    • The MIDI KIT Shield module can be plugged directly into the Arduino baseboard - the MIDI-IN connector will be connectedlinks to the Rx pin, while the MIDI-OUT connector will stay connectremains hooked to the Tx pin, and the potentiometers on the MIDI KIT Shield board - to the A1 and A2 pins in the section oflocated in the analogue pins interface.
      AussieInBgAussieInBg profile picture Ulasan
      Undi sekarang!
    • TAMBAH PEMBETULAN YANG BARU! - Ayat 11TAMBAH PEMBETULAN YANG BARU! - Ayat 11
  • Ayat 12
    • In this way, they can be controlled by adjusting the instrument’s output volume, retuning, timbre, or other parameters assigned by the user.
      Undi sekarang!
    • TAMBAH PEMBETULAN YANG BARU! - Ayat 12TAMBAH PEMBETULAN YANG BARU! - Ayat 12
  • Ayat 13
    • In addition, the board has three momentary buttons connected to the Arduino digital pins 2-4, with which you can transpose the keyboard, change presets, and other user-assigned functions.
      Undi sekarang!
    • In addition, the board has three momentary buttons connected to the Arduino digital pins 2-4, with which you can transpose the keyboard, change presets, and perform other user-assigned functions.
      AussieInBgAussieInBg profile picture Ulasan
      Undi sekarang!
    • TAMBAH PEMBETULAN YANG BARU! - Ayat 13TAMBAH PEMBETULAN YANG BARU! - Ayat 13
  • Ayat 14
    • The board has a RESET button, two LEDs that signal i.e. the exchange of MIDI messages, and a RUN/PROG button that allows you to re-program Arduino without disconnecting the MIDI KIT Shield module.
      Undi sekarang!
    • The board has a RESET button, two LEDs that signal i.e., for example, the exchange of MIDI messages, and a RUN/PROG button that allows you to re-program Arduino without disconnecting the MIDI KIT Shield module.
      AussieInBgAussieInBg profile picture Ulasan
      Undi sekarang!
    • TAMBAH PEMBETULAN YANG BARU! - Ayat 14TAMBAH PEMBETULAN YANG BARU! - Ayat 14
  • Ayat 15
    • The Spectrum Shield enriches the Arduino baseboard with the ability to split the stereo audio signal fed to the input of the system into seven frequency bands for each channel.
      Undi sekarang!
    • TAMBAH PEMBETULAN YANG BARU! - Ayat 15TAMBAH PEMBETULAN YANG BARU! - Ayat 15
  • Ayat 16
    • As a result, using an analog-to-digital converter in the Arduino (analog pins 0-5), you can control any external object (e.g. a motor, lighting, or a buzzer) by detecting the sound in a programmed frequency band of the input signal (e.g. using prescaler), and examine its frequency spectrum as well.
      Undi sekarang!
    • As a result, using an analog-to-digital converter in the Arduino (analog pins 0-5), you can control any external object (e.g. a motor, lighting, or a buzzer) by detecting the sound in a programmed frequency band of the input signal (e.g. using a prescaler), and at the same time examine its frequency spectrum as well.
      AussieInBgAussieInBg profile picture Ulasan 1
      Undi sekarang!
    • TAMBAH PEMBETULAN YANG BARU! - Ayat 16TAMBAH PEMBETULAN YANG BARU! - Ayat 16
  • Ayat 17
  • Ayat 18
  • Ayat 19
    • The shield can also be used to build sound responsive illumination to create colorful animations for music, as well as sound activation of other devices.
      Undi sekarang!
    • TAMBAH PEMBETULAN YANG BARU! - Ayat 19TAMBAH PEMBETULAN YANG BARU! - Ayat 19
  • Ayat 20
    • Forbot Robot Shield Arduino The expansion shield from Forbot, compatible with Arduino, is a versatile electronic module with which you can add many interesting, useful functions to your robot.
      Undi sekarang!
    • Forbot Robot Shield Arduino -
      The expansion shield from Forbot, compatible with Arduino, is a versatile electronic module with which you can add many interesting, useful functions to your robot.
      AussieInBgAussieInBg profile picture Ulasan
      Undi sekarang!
    • TAMBAH PEMBETULAN YANG BARU! - Ayat 20TAMBAH PEMBETULAN YANG BARU! - Ayat 20
  • Ayat 21
    • On a small PCB, apart from the connectors with a pin layout compatible with Arduino UNO R3, there is a two-channel driver for DC motors, which allows you to control their speed and direction of rotation.
      Undi sekarang!
    • TAMBAH PEMBETULAN YANG BARU! - Ayat 21TAMBAH PEMBETULAN YANG BARU! - Ayat 21
  • Ayat 22
  • Ayat 23
  • Ayat 24
  • Ayat 25
    • The buzzer with the infrared receiver can be programmed to trigger an acoustic signal when an obstacle is detected near the robot.
      Undi sekarang!
    • The buzzer along with thean infrared receiver can be programmed to trigger an acoustic signal when an obstacle is detected near the operated robot.
      AussieInBgAussieInBg profile picture Ulasan
      Undi sekarang!
    • TAMBAH PEMBETULAN YANG BARU! - Ayat 25TAMBAH PEMBETULAN YANG BARU! - Ayat 25
  • Ayat 26
    • Besides, the board has a slide switch, an LED that indicates that the module is on, a polymer fuse, and protection against voltage with reverse polarity.
      Undi sekarang!
    • BesidesIn addition, the board has a slide switch, an LED that indicates that the module is on, a polymer fuse, and diode protection against voltage with reverse polarity voltages.
      AussieInBgAussieInBg profile picture Ulasan 1
      Undi sekarang!
    • TAMBAH PEMBETULAN YANG BARU! - Ayat 26TAMBAH PEMBETULAN YANG BARU! - Ayat 26
  • Ayat 27
    • The board requires a voltage of 7-11 V, while the Arduino base module draws power from the Robot Shield board and thus does not need a separate power source.
      Undi sekarang!
    • The board requires a voltage of 7-11 V, while. However, the Arduino base module draws power from the Robot Shield board and thus does not need a separate power source.
      AussieInBgAussieInBg profile picture Ulasan 1
      Undi sekarang!
    • TAMBAH PEMBETULAN YANG BARU! - Ayat 27TAMBAH PEMBETULAN YANG BARU! - Ayat 27
  • Ayat 28
    • SparkFun XBee Shield – a shield for Arduino Radio communication with the XBee system is a great way to increase the wireless communication capabilities of Arduino, and this can be achieved with a compatible SparkFun XBee Shield module attached to the baseboard.
      Undi sekarang!
    • SparkFun XBee Shield – a shield for Arduino¶
      Radio communication with the XBee system      . This is a great way to increase the wireless communication capabilities of Arduino, and this can be achieved with a compatible SparkFun XBee Shield module attached to the baseboard.
      AussieInBgAussieInBg profile picture Ulasan
      Undi sekarang!
    • TAMBAH PEMBETULAN YANG BARU! - Ayat 28TAMBAH PEMBETULAN YANG BARU! - Ayat 28