Javítások

Alexandr614 szövege - English

  • Article

  • Liquid from the inlet nozzle was flowing of single droplets when the flow rate L < 4.5 ml/s.
    • Liquid from the inlet nozzle was breaking on many splashes and droplets on top of the packing element at the moment of contact the jet of the fluid with the packing element when the flow rate L > 25 ml/s.
    • The liquid jet was bumping on top of the packing element and the liquid jet was transforming into a liquid film with certain width in the range 4.5 ml/s < L > 25 ml/s.
  • Four different regimes of falling of liquid film on the packing surface were determined in this range of flow rates:...

KÉRLEK, SEGÍTS KIJAVÍTANI MINDEN MONDATOT! - English

  • Mondat 1
  • Mondat 2
    • Liquid from the inlet nozzle was breaking on many splashes and droplets on top of the packing element at the moment of contact the jet of the fluid with the packing element when the flow rate L > 25 ml/s.
      Szavazz most!
    • Liquid from the inlet nozzle was breaking on many splashes and droplets on top of the packing element at the moment of contact the jet of the fluid with the packing element when the flow rate L > 25 ml/sWhen the flow rate was L > 25 ml/s, at the moment of contact the jet of the fluid with the packing element, the liquid from the inlet nozzle was breaking on many splashes and droplets on top of the packing element.
    • ADJ HOZZÁ EGY ÚJ JAVÍTÁST! - Mondat 2ADJ HOZZÁ EGY ÚJ JAVÍTÁST! - Mondat 2
  • Mondat 3
    • The liquid jet was bumping on top of the packing element and the liquid jet was transforming into a liquid film with certain width in the range 4.5 ml/s < L > 25 ml/s.
      Szavazz most!
    • TAs for when 4.5 ml/s < L > 25 ml/s, the liquid jet was bumping on top of the packing element, and the liquid jet was transforming into a liquid film with certain width in the range 4.5 ml/s < L > 25 ml/s.
    • ADJ HOZZÁ EGY ÚJ JAVÍTÁST! - Mondat 3ADJ HOZZÁ EGY ÚJ JAVÍTÁST! - Mondat 3
  • Mondat 4